Monthly Archives: July 2012

How to Program Toyota 4runner Keyless entry remote

  • Get in the drivers side of the vehicle, make sure all the doors are closed except the drivers side door and all the door locks are unlocked.
  • Insert the key into the ignition without turning and remove it quickly
  • Insert the key into the ignition without turning and remove it quickly
  • Close the drivers side door, then open it.
  • Close the drivers side door, then open it.
  • Insert the key into the ignition without turning it and remove it quickly.
  • Close the drivers side door, then open it.
  • Close the drivers side door, then open it.
  • Insert key into the ignition (do not remove, do not turn).
  • Close the drivers side door.
  • Turn key to “On”, then to “Off”
  • Remove the key
  • Vehicle locks should lock and then unlock to signify programming mode.  If not, repeat above steps.
  • Press and hold “Lock” and “Unlock” on the keyless entry remote simultaneously for 2 seconds.
  • Let go of the buttons and quickly press the “Lock” button (by itself) on the keyless entry remote and hold it for 2 seconds.
  • Doors should lock and unlock to signify successful programming
  • Repeat 2 previous steps to program additional remotes
  • Open the drivers side door to exit programming mode.